Turn off the appliance completely and let cool before servicing. Only a q
person should service and repair this electric appliance.
1. Remove the cover plate from the left side of the appliance by removing the two screws,
as shown below. Unscrew and remove power cord.
2.
Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the
neutral wire into “N” and the ground wire into “G”.
3.
Return the cover plate to the left side and screw the two screws back in to fasten the plate.
24
Turn off the appliance completely and let cool before servicing. Only a q
person should service and repair this electric appliance.
Remove the cover plate from the left side of the appliance by removing the two screws,
as shown below. Unscrew and remove power cord.
Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the
wire into “N” and the ground wire into “G”.
Return the cover plate to the left side and screw the two screws back in to fasten the plate.
Turn off the appliance completely and let cool before servicing. Only a qualified service
Remove the cover plate from the left side of the appliance by removing the two screws,
Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the
Return the cover plate to the left side and screw the two screws back in to fasten the plate.
HARDWIRE INSTALLATION
If it is necessary to hardwire this appliance, a qualified electrician must remove the cord
connection, and wire the appliance directly to the house hold wiring.
This appliance must be electrically connected and grounded in accordance with local codes,
if hardwired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANS/NFPA 70 NATIONAL ELECTRICAL
CODE in the United States.
Summary of Contents for SM-1900100-1
Page 34: ...EXPLODED VIEW 34 ...
