background image

38

TO QUALIFY FOR THIS WARRANTY

(1) Machine must be registered within 30 days from the time of 

purchase on a form provided by American Sanders. Your 

American Sanders Distributor is responsible for the registration 

of your machine. Please cooperate with your Distributor in 

supplying necessary information on the card.

(2) The machine must have been purchased from American Sanders 

or an authorized American Sanders Distributor.

(3) This warranty extends to the original purchaser only and is not 

transferable to subsequent owners.

TIME PERIODS

ONE (1) YEAR WARRANTY - For the FloorCrafter.

Warranted to be free from defects in material and workmanship for 

a period of one (1) year from the date of purchase by the original 

owners. (See Exclusions)

EXCLUSIONS (Not Covered by Warranty)

(1) Expendable wear items and parts that fail through normal wear 

by reason of their characteristics (cords, drums, belts, wheels, 

bearings, filters, bags, or other consumable parts).

(2) This warranty does not extend to parts affected by misuse, 

neglect, abuse, accidents, damage in transit, overloading 

the capacity of the machine, failure due to lack of proper 

maintenance or care as described in the operating and 

maintenance instructions. All defective parts must be returned to 

the distributor for credit.

(3)  Minor adjustments, such as tightening of screws or bolts not 

connected with the replacement of parts, are not covered.

(4)  Repairs or alterations by an organization other than the factory or 

an Authorized Service Center are not covered and will void any 

American Sanders warranty as to the parts or systems repaired 

or altered by a non-authorized organization.

THE OBLIGATION OF AMERICAN SANDERS

(1)  The obligation of American Sanders under this warranty is limited 

to repairing or replacing, at its option, any part which is proven to 

be defective in material or workmanship under normal use for the 

applicable period stated above.

(2) Warranty repairs will be made by your American Sanders 

Distributor without charge for parts and labor. They will be 

compensated with a warranty labor rate of $45.00 per hour, for 

the first year of ownership.

(3) Parts repaired or replaced under this warranty are warranted only 

during the balance of the original warranty period. All defective 

parts replaced under these warranties become the property of 

American Sanders.

WARRANTY SERVICE

To obtain warranty service, take your machine and proof of 

purchase to any authorized American Sander Distributor.  American 

Sanders will not reimburse expenses for service calls or travel. 

For the Distributor in your area, call American Sanders Customer 

Service Department at 800-367-3550 or +1-336-372-8080. If you 

are dissatisfied with the service that you receive, call or write 

American Sanders Customer Service Department for further 

assistance.

INSTRUCTIONS AND CONDITIONS FOR WARRANTY 

REIMBURSEMENT

Order replacement part: Orders will be processed and charged, 

as normal procedure.

Call American Sanders for R/A number.

You will need the Machine Serial Number and the Machine 

Model Number.

Parts must be returned, accompanied with the R/A number to be 

eligible for warranty credit.

All Warranty Parts will be shipped prepaid UPS Ground, any 

other method will be at the recipients expense.

Freight on any Warranty Part after 30 days must be paid for by 

the Purchaser.

Warranty labor rate is $45.00 per hour.

Credit will be issued upon completion of the above steps, at the 

above rates.

Transportation of hazardous waste or contaminated equipment is 

subject to various laws and regulations.  In returning machines, parts, 

or accessories under this limited warranty, the end user must certify 

in writing that the machines, parts, or accessories being returned 

have not been used for handling, clean up, or disposal of hazardous 

waste or hazardous materials including but not limited to such things 

as asbestos, anthrax etc. or if the machines, parts, or accessories 

being returned have been used for handling, clean up, or diposal of 

hazardous waste or hazardous materials, then the end user must 

have the machines, parts or accessories decontaminated by licensed 

and  qualified  decontamination  professionals  and  provide  written 

certification of this decontamination signed by the decontamination 

professionals.  These machines, parts or accessories are to 

be returned only to the local American Sanders Service Center 

for  warranty  service  along  with  decontamination  certification.

DISCLAIMER OF CONSEQUENTIAL

THERE ARE NO WARRANTIES THAT EXTEND BEYOND 

THE DESCRIPTION OF THE LIMITED WARRANTIES STATED 

WITHIN.  NO OTHER WARRANTY, EXPRESSED OR IMPLIED, 

INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY 

OF MERCHANTABLILITY OR FITNESS FOR A PARTICULAR 

PURPOSE, IS MADE EXCEPT AS EXPRESSLY STATED HEREIN.  

ANY STATUTORY IMPLIED WARRANTIES, INCLUDING ANY 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE, THAT ARE IMPOSED BY LAW DESPITE 

THE EXPRESS LIMITATION OR WARRANTIES ABOVE, ARE 

EXPRESSLY LIMITED TO THE DURATION OF THE WRITTEN 

WARRANTY.  BUYER UNDERSTANDS, ACKNOWLEDGES 

AND AGREES THAT THE REMEDIES PROVIDED UNDER 

THIS LIMITED WARRANTY ARE THE SOLE AND EXCLUSIVE 

REMEDIES AVAILABLE TO THE BUYER.  AMERICAN 

SANDERS DISCLAIMS ANY RESPONSIBLITY FOR LOSS OF 

USER TIME OF THE AMERICAN SANDERS MACHINE OR 

 

ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

THIS INCLUDES, BUT NOT LIMITED TO INDIRECT, SPECIAL 

OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN 

CONNECTION WITH THE FURNISHING, PERFORMANCE, USE 

OF OR INABILITY TO USE THE MACHINE.  ANY EXTENSIONS 

OF OR MODIFICATIONS MADE TO THIS WARRANTY BY A 

DEALER/DISTRIBUTOR OF AMERICAN SANDERS ARE THE 

SOLE RESPONSIBILITY OF THE DEALER/DISTRIBUTOR.

American Sanders reserves the right to 

change its warranty policy without notice.

Copyright 2020 American Sanders

Limited Warranty

FloorCrafter

LT085700_A; 12.21.20

Summary of Contents for American SANDERS FloorCrafter









































Reviews: