background image

27

TO QUALIFY FOR THIS WARRANTY

(1)  Machine must be registered within 30 days from the time of purchase 

on a form provided by American Sanders. Your American Sanders 

Distributor is responsible for the registration of your machine. Please 

cooperate with your Distributor in supplying necessary information on 

the card.

(2)  The machine must have been purchased from American Sanders or 

an authorized American Sanders Distributor.

(3)  This warranty extends to the original purchaser only and is not 

transferable to subsequent owners.

TIME PERIODS

ONE (1) YEAR WARRANTY - For the Compass.

Warranted to be free from defects in material and workmanship for a 

period of one (1) year from the date of purchase by the original owners. 

(See Exclusions)

EXCLUSIONS (Not Covered by Warranty)

(1)  Expendable wear items and parts that fail through normal wear by 

reason of their characteristics (cords, pads, sanding discs, carbon 

motor brushes, wheels, bulbs, filters, bags, or other consumable 

parts).

(2)  This warranty does not extend to parts affected by misuse, neglect, 

abuse, accidents, damage in transit, overloading the capacity of 

the machine, failure due to lack of proper maintenance or care as 

described in the operating and maintenance instructions. All defective 

parts must be returned to the distributor for credit.

(3)  Minor adjustments, such as tightening of screws or bolts not 

connected with the replacement of parts, are not covered.

(4)  Repairs or alterations by an organization other than the factory or 

an Authorized Service Center are not covered and will void any 

American Sanders warranty as to the parts or systems repaired or 

altered by a non-authorized organization.

THE OBLIGATION OF AMERICAN SANDERS

(1)  The obligation of American Sanders under this warranty is limited 

to repairing or replacing, at its option, any part which is proven to 

be defective in material or workmanship under normal use for the 

applicable period stated above.

(2)  Warranty repairs will be made by your American Sanders Distributor 

without charge for parts and labor. They will be compensated with a 

warranty labor rate of $45.00 per hour, for the first year of ownership.

(3)  Parts repaired or replaced under this warranty are warranted only 

during the balance of the original warranty period. All defective parts 

replaced under these warranties become the property of American 

Sanders.

WARRANTY SERVICE

To obtain warranty service, take your machine and proof of purchase to 

any authorized American Sander Distributor. American Sanders will not 

reimburse expenses for service calls or travel. For the Distributor in your 

area, call American Sanders Customer Service Department at 800-367-

3550 or 336-372-8080. If you are dissatisfied with the service that you 

receive, call or write American Sanders Customer Service Department 

for further assistance.

INSTRUCTIONS AND CONDITIONS FOR WARRANTY 

REIMBURSEMENT

Order replacement part: Orders will be processed and charged, as 

normal procedure.

Call American Sanders for R/A number.

You will need the Machine Serial Number and the Machine Model 

Number.

Parts must be returned, accompanied with the R/A number to be 

eligible for warranty credit.

All Warranty Parts will be shipped prepaid UPS Ground, any other 

method will be at the recipients expense.

Freight on any Warranty Part after 30 days must be paid for by the 

Purchaser.

Warranty labor rate is $45.00 USD per hour.

Credit will be issued upon completion of the above steps, at the 

above rates.

Transportation of hazardous waste or contaminated equipment is 

subject to various laws and regulations. In returning machines, parts, 

or accessories under this limited warranty, the end user must certify in 

writing that the machines, parts, or accessories being returned have not 

been used for handling, clean up, or disposal of hazardous waste or 

hazardous materials including but not limited to such things as asbestos, 

anthrax etc. or if the machines, parts, or accessories being returned have 

been used for handling, clean up, or disposal of hazardous waste or 

hazardous materials, then the end user must have the machines, parts or 

accessories decontaminated by licensed and qualified decontamination 

professionals  and  provide  written  certification  of  this  decontamination 

signed by the decontamination professionals. These machines, parts or 

accessories are to be returned only to the local American Sanders Service 

Center  for  warranty  service  along  with  decontamination  certification.

DISCLAIMER OF CONSEQUENTIAL

THERE  ARE  NO  WARRANTIES  THAT  EXTEND  BEYOND  THE 

DESCRIPTION OF THE LIMITED WARRANTIES STATED WITHIN. NO 

OTHER  WARRANTY,  EXPRESSED  OR  IMPLIED,  INCLUDING  BUT 

NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR  FITNESS  FOR  A  PARTICULAR  PURPOSE,  IS  MADE  EXCEPT 

AS  EXPRESSLY  STATED  HEREIN.  ANY  STATUTORY  IMPLIED 

WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY 

OR  FITNESS  FOR A  PARTICULAR  PURPOSE, THAT ARE  IMPOSED 

BY  LAW  DESPITE  THE  EXPRESS  LIMITATION  OR  WARRANTIES 

ABOVE,  ARE  EXPRESSLY  LIMITED  TO  THE  DURATION  OF  THE 

WRITTEN  WARRANTY.  BUYER  UNDERSTANDS,  ACKNOWLEDGES 

AND  AGREES  THAT  THE  REMEDIES  PROVIDED  UNDER  THIS 

LIMITED  WARRANTY ARE  THE  SOLE AND  EXCLUSIVE  REMEDIES 

AVAILABLE  TO  THE  BUYER.  AMERICAN  SANDERS  DISCLAIMS 

ANY  RESPONSIBILITY  FOR  LOSS  OF  USER  TIME  OF  THE 

AMERICAN  SANDERS  MACHINE  OR  ANY  OTHER  INCIDENTAL 

OR  CONSEQUENTIAL  DAMAGES.  THIS  INCLUDES,  BUT  NOT 

LIMITED  TO  INDIRECT,  SPECIAL  OR  CONSEQUENTIAL  DAMAGES 

ARISING  OUT  OF  OR  IN  CONNECTION  WITH  THE  FURNISHING, 

PERFORMANCE,  USE  OF  OR  INABILITY  TO  USE  THE  MACHINE. 

ANY  EXTENSIONS  OF  OR  MODIFICATIONS  MADE  TO  THIS 

WARRANTY BY A DEALER/DISTRIBUTOR OF AMERICAN SANDERS 

ARE  THE  SOLE  RESPONSIBILITY  OF  THE  DEALER/DISTRIBUTOR.

American Sanders reserves the right to change 

its warranty policy without notice.

Copyright 2021 American Sanders

Limited Warranty

Compass

Summary of Contents for American Sanders Compass

































Reviews: