The result: a precise and neatly
sawed model in the articulator.
MOUNTING ALTERNATIVE I:
SECONDARY PLATE
MOUNTING ALTERNATIVE II:
MAGNET AND SOCKET
MOUNTING ALTERNATIVE III:
SETTING PINS (GIROFORM CLASSIC)
Apply plaster onto both sides and
close the articulator without
pressure.
Put a secondary plate onto the
finished Giroform model.
Apply articulating plaster onto the
model and onto the articulator side.
Close the articulator without
pressure.
Block out the pin tips
with putty.
Put a space retainer foil in the
center and fix it with magnets.
Set 3 pins into the model plate.
Block out the pin tips with putty,
put a space retainer foil on it.
Apply plaster onto both sides and
close the articulator without
pressure.
GB
17
