39
O P E R A T I O N D U R I N G P R O D U C T I O N
E N
▷
To verify the block: Scan the material code from
the block or the packaging.
▷
After the job is set up: Press the
START button.
▷
To interrupt or stop the program: Press
STOP
button.
7.5
Milling zirconium oxide
When milling zirconium oxide, an additional query
is made as to whether the necessary water tank
with special 5
μ
m filter is inserted.
At the end of the milling/grinding pro-
gram, the door opens automatically.
NOTE:
Possible damage to the machine and insufficient
milling results! The included water tank for
processing glass ceramics and plastics uses fil-
ters with 10
μ
m mesh.
▷
In the zirconium water tank 181410, use only
the filters with 5
μ
m mesh size provided for
this purpose (observe imprint on foil).
