Amann Girrbach ceramill motion 2, Instruction Manual

Page: 8 / 24

8
A P P L I C A T I O N
E N
4.2 Preparing the Ceramill Motion 2
When the Ceramill Motion 2 is set up for dry
processing:
▷
Convert the Ceramill Motion 2 for wet process-
ing (see Ceramill Motion 2 Operating Instruc-
tions)
▷
Disengage lever [3] and pull off the transparent
splash guard [1] toward the front.
Fig. 3
1 Splash guard
2 Blank holder
3 Lever
A Operation button
To remove the blank holder:
▷
With the door closed, press operation button
[A] for at least three seconds.
The current tool is placed down and the blank
holder [2] returns to the change position.
Fig. 4
1 Fastening screw for blank holder
2 Blank holder
▷
Loosen fastening screw [1].
▷
Pull off the blank holder toward the right.
▷
Clean the locating bore and surfaces.
Fig. 5
1
2
3
A
1.
2.
Blank holders not in use can be placed on
the storage rack and thus securely stored.
2
1