Amana W10773366A, Use And Care Manual

Page: 5 / 32

5
Installation Clearances
The location must be large enough to allow the dryer door to
open fully.
Dryer Dimensions
Front View
23
7
/
8
"
(606 mm)
1
3
/
4
"
(44 mm)
*20
3
/
4
"
(527 mm)
31"
(787 mm)
Side View
1
3
/
4
"
(44 mm)
36"
(914 mm)
20
3
/
4
"
(527 mm)
Back View
1
3
/
4
"
(44 mm)
3
1
/
4
"
(83 mm)
3
1
/
2
"
(89 mm)
11
7
/
8
"
(303 mm)
29
1
/
4
"
(743 mm)
”
Minimum spacing for recessed area and
closet installation
The following dimensions shown are for the minimum spacing
allowed when the dryer is to be operated with, or without, the
Stack Stand Kit. To purchase a Stack Stand Kit, see “Assistance
or Service.”
■
Additional spacing should be considered for ease of
installation and servicing.
■
Additional clearances might be required for wall, door, and
floor moldings.
■
For closet installation with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings
are acceptable.
■
Companion appliance spacing should also be considered.
Recessed or closet installation - Dryer only
A B
14"*
(356 mm)
18"* (457 mm)
1"
(25 mm)
1"
(25 mm)
5
1
/
2
"*
(140 mm)
A. Side view - closet or confined area
B. Recessed area
*Most installations require a minimum 5½" (140 mm) clearance
behind the dryer for the exhaust vent with elbows. See “Venting
Requirements.”
Recessed or closet installation - Stacked
DRYER
WASHER
5
1
/
2
"
(76 mm)
(305 mm)
12"*
(305 mm)
12"*
1"
(25 mm)
1"
(25 mm)
A B C
1"*
(25 mm)
3"*
(76 mm)
48 in. *
2
(309.7 cm )
2
24 in. *
2
(154.8 cm )
2
3"*
(76 mm)
A. Recessed area
B. Side view - closet or confined area
C. Closet door with vents
Mobile Home - Additional Location Requirements
This dryer is suitable for mobile home installations. The
installation must conform to the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction and
Safety, Title 245, HUD Part 280) or Standard CAN/CSA-Z240 MH.
Mobile home installations require:
■
Metal exhaust system hardware, which is available for
purchase from your dealer.
■
Special provisions must be made in mobile homes to
introduce outside air into the dryer. The opening (such as a
nearby window) should be at least twice as large as the dryer
exhaust opening.