11
INS TALL THE AIR CONDITIONER
IN THE CASE
Slide the air
conditioner into
the case. Do not
push on th
e
controls or the
finned coils.
Make sure the
air conditioner
is firmly seated.
Reinstall the locking bracket and screw
removed earlier
.
Reconnect the ground wire to the air
conditioner using the screw removed earlier
.
IMPOR TANT : The ground wire must be
reinstalled to ensure a proper ground.
Remove the front grille from its box and
remove the sh
ipping tape.
Grasp the inlet grille at the bottom corners
and pull it forward. Unhook it from its top
hinges and set it aside.
Using the tab, pull up slightly on the filter
to release it and pull it down and out.
F
E
D
C
B
A
8
Ins tallatio n I nstructio ns
INSTALL THE AIR CONDITIONER
IN THE CASE (cont.)
Pull the coiled power cord from its shipped
position in the air discharge area. Attach
the front grille frame to the case by inserting
the tabs on the grille frame into the slots
on the front top of the case. Push the grille
frame in. And install the 2 side screws at bottom
left and right side of front panel.
Secure the front grille frame to the case
with one type C screw
.
Reinstall the filter
.
Reinstall the inlet grille. Connect power
.
J
I
H
G
8
Guide the lever carefully
through the grille fram e
as you pus h it in.
Remove the front grille from its box and
remove the shipping tape.
Slide the air
conditioner into
the case. Do not
push on the
controls or the
finned coils.
Make sure the
air conditioner
is firmly seated.
Installation Instructions
Pull the coiled power cord from its shipped
position in the air discharge area. Attach the
front grille frame to the case by inserting the tabs
on the grille frame into the slots on the front top
of the case. Push the grille frame in. Install the
2 Type F screws at the bottom left and right sides
of the front panel.
