12
Care and Cleaning
WARNING
!
To avoid electrical shock which can cause severe personal injury or death, unplug power cord or open circuit
breaker to oven before cleaning or removing light bulb. Reconnect power after cleaning or replacing light bulb.
Record all inspections and repairs for future reference on
pages provided.
Changing Oven Light Bulb
Tools and Bulb
Protective gloves
Standard screwdriver
Light bulb rated 115125 volt, 40 watt, part number
10664502
1. Unplug oven.
2. Remove screw from access cover and remove cover.
See illustration below.
3. Remove bulb by turning counterclockwise, being
careful not to burn fingers or break bulb.
4. Replace with bulb rated 115125 volt, 40 watt, part
number 10664502
5. Plug in oven.
CAUTION
To avoid burns and cuts, wear gloves to protect hands
should bulb break. If hot, allow bulb to cool.
CAUTION
To avoid oven cavity damage, do not operate oven
without splatter shield in place. Arcing will damage
oven cavity and antenna when operated without shield
in place.
Remove screw and cover
to change light bulb
Cleaning Splatter Shield
Splatter shield keeps top of microwave oven cavity and
antenna from becoming soiled. Clean soil from shield
with damp cloth or clean with mild detergent and water.
Remove splatter shield for easy cleaning.
1. Unplug oven before removing splatter shield to stop
antenna from rotating.
2. Place fingers on front of shield, push forward, and
down.
When removing and replacing splatter shield, be
careful not to bend antenna.
3. Wash shield in hot, soapy water. Rinse and
dry thoroughly.
Do not wash splatter shield in dishwasher.
Do not use abrasive cleaners.
4. Reinstall splatter shield by fitting tabs into slots at
top of oven cavity back wall. Lift and press front of
shield until shield snaps into place.
