Amana PHB**C Installation Instructions Manual Download Page 1

Installation

Instructions

October 1997

10730406

Amana

Fayetteville, TN 37334

As a professional installer you have an obligation to
know the product better than the customer. This in-
cludes all safety precautions and related items.

Prior to actual installation, thoroughly familiarize your-
self with this Instruction Manual. Pay special attention
to all safety warnings. Often during installation or repair
it is possible to place yourself in a position which is
more hazardous than when the unit is in operation.

ATTENTION INSTALLING PERSONNEL

PHB**C and PHD**C

Single Package

Heat Pump

Heating and Cooling Unit

Affix this manual, Specification Sheet and User

Information manual adjacent to the unit.

 RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION

Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct
a customer in its safe use.

Safety is a matter of common sense...a matter of
thinking before acting. Most dealers have a list of
specific good safety practices...follow them.

The precautions listed in this Installation Manual should
not supersede existing practices but should be consid-
ered as supplemental information.

Contents

ATTENTION INSTALLING PERSONNEL ............. 1
I. Safety Information ............................................ 2
II. General Information ........................................ 2
III. Rigging and Handling .................................... 3
IV. Duct Connections ........................................... 4
V. Electrical Wiring .............................................. 4
Vl. Circulating Air and Filters .............................. 5
VII. Condensate Drain ......................................... 6
VIII. Sequence of Operations .............................. 7
IX. Startup and Adjustment ................................. 7
X. Maintenance .................................................... 7
XI. Accessories .................................................... 8

A  higher standard of comfort

H e a tin g  

¡

  A ir  C o n d itio n in g

®

Summary of Contents for PHB**C









Reviews: