6
PREPARE THE FREEZER COMPARTMENT
2. REMOVE THE ICE SERVICE RACK
(some models)
On some models, an ice service rack is
mounted on two screws in the freezer
side wall. If your refrigerator has an ice
service rack:
a. Remove ice trays and storage bin.
b. Remove the two screws and
discard screws and washers.
Ice service rack
Washer
Screws
3. REMOVE ELECTRICAL AND
WATER CONNECTION COVER.
Remove screw that holds the cover in
place. Discard the screw and cover.
Electrical plug
and water
connection
cover
Screw
4. INSTALL WATER FILL TUBE THROUGH
THE BACK OF THE REFRIGERATOR.
a. Remove the cover for the water tube inlet
hole on the back of the refrigerator near
the bottom. Use a flat-bladed screwdriver
blade covered with masking tape to
prevent scratching the refrigerator.
Masking
tape
Cover for the water tube inlet
hole on the back of the refrigerator
b. After removing the cover, use the
screwdriver to pierce the interior sealing
tape that covers the hole for the water fill
tube inlet. Clear a path for the water fill
tube.
Electrical connection
Back of the
refrigerator
Water tube
inlet hole
Back wall
inside
freezer
Sealing tape
(remove)
1. REMOVE ALL BASKETS AND
SHELVES FROM THE FREEZER.
