Amana ARPT**14 Series, Installation & Operating Instructions Manual

Page: 10 / 24

10
3 5 6 8 10 15 19/20 25
800
12 19 23 31 37
1000
9 15 19 25 30 44
1200 8 12 15 21 25 37 49 62
1400
7 11 13 18 21 32 42 53
1600
6 9 12 15 19 28 37 46
1800 5 8 10 14 16 25 33 41
2000
5 7 9 12 15 22 30 37
CFM
HEAT KIT NOMINAL kW
230/1/60 SUPPLY VOLTAGE - TEMP. RISE °F
Table 2
3 5 6 8 10 15 19/20 25
800
11 18 22 30 35
1000
9 14 18 24 28 42
1200
7 12 15 20 24 35 47 59
1400 6 10 13 17 20 30 40 51
1600
6 9 11 15 18 27 35 44
1800
5 8 10 13 16 24 31 39
2000 4 7 9 12 14 21 28 35
CFM
HEAT KIT NOMINAL kW
220/1/60 SUPPLY VOLTAGE - TEMP. RISE °F
Table 3
3 5 6 8 10 15 19/20 25
800 10 17 21 28 33
1000
8 13 17 22 27 40
1200 7 11 14 19 22 33 45 56
1400
6 10 12 16 19 29 38 48
1600 5 8 10 14 17 25 33 42
1800
5 7 9 12 15 22 30 37
2000 4 7 8 11 13 20 27 33
CFM
HEAT KIT NOMINAL kW
208/1/60 SUPPLY VOLTAGE - TEMP. RISE °F
Table 4
3 5 6 8 10 15 19 20 25
18 715 715 715 715 950
24 715 715 715 715 950
30 715 715 715 715 875 875
36 1170 1170 1170 1170 1345 1345
42 1170 1170 1170 1170 1345 1345
48 1590 1590 1590 1590 1715 1715 1715
60 1590 1590 1590 1590 1715 1715 1715
*ARUF
ARPT
ASPT
HEATER (kW)
*Table applies to ARUF**14**, ARPT**14** & ASPT**14**
Table 5
MINIMUM CFM REQUIRED FOR HEATER KITS
3 5 6 8 10 15 19 20 25
49 1170 1170 1170 1170 1345 1345
59 1590 1590 1590 1590 1715 1715 1715
*ASUF
HEATER (kW)
*Table applies to ASUF**14**
Table 6
MINIMUM CFM REQUIRED FOR HEATER KITS
13 Electrical and Control Wiring
IMPORTANT: All routing of electrical wiring must be made
through provided electrical knockouts. Do not cut, puncture
or alter the cabinet for electrical wiring.
13.1 Building Electrical Service Inspection
This unit is designed for single-phase electrical supply
only. DO NOT OPERATE ON A THREE-PHASE
POWER SUPPLY. Measure the power supply to the
unit. The supply voltage
must be measured and be in
agreement with the unit nameplate power requirements
and within the range shown.
Nominal Input Minimum Voltage Maximum Voltage
208 - 240 197 253
ELECTRICAL VOLTAGE
Table 7
13.2 Wire Sizing
Wire size is important to the operation of your equip-
ment. Use the following check list when selecting the
appropriate wire size for your unit.
FIRE HAZARD!
To avoid the risk of property damage, personal injury
or fire, use only copper conductors.
HIGH VOLTAGE!
Failure to do so may cause property damage,
personal injury or death.
Disconnect ALL power before servicing.
Multiple power sources may be present.