Amana ARHC7700, Use And Care Manual, Page: 25 / 32

Maintenance
Removing the Oven Door
The oven door can be removed for ease in
cleaning large spills.
1. Open the door to the first stop.
2. Grasp the door firmly on each side and lift it
upward off the hinges. Do not lift door using
door handle. Do not push the hinges closed
once the oven door is removed.
Replacing the Oven Door
1. Make sure the hinges are open to the first
stop position. If the hinges have been
accidentally closed, carefully pull them open
to the first stop. Align the door with the hinge
arms.
2. Slide the door down and into place. Be sure
the door is completely down on the hinges.
Replacing the Fluorescent Backguard
Light Bulb
1. Wear protective gloves. Disconnect the
electrical supply.
2. Grasp the ends of top backguard cover firmly
and flip it upward and open.
3. Hold the fluorescent bulb using both hands
and carefully rotate it upward toward the back
of the range. Lift the bulb out.
4. Slide the pins on both ends of the new bulb
into the lamp holder slots. Push down slightly
and rotate the bulb toward the front of the
range until it clicks into the socket. Close the
top backguard cover.
Replacing the Oven Light Bulb
1. Wear protective gloves. Disconnect the
electrical supply.
Oven Door
To avoid personal injury or property
damage, handle the oven door with care.
The door is heavy and can be damaged if
it is dropped.
Do not lift door using door handle.
Do not place hands in hinge area when
the door is removed. The hinge can snap
closed and pinch your hands.
The door contains tempered glass. If the
glass is impacted, scratched, chipped or
twisted it may break suddenly. If the door
glass appears damaged it should be
replaced immediately.
2. Remove the oven door.
I
I
3. Unscrew the bulb cover counterclockwise.
4. Unscrew the light bulb counterclockwise.
To avoid the risk of burns or electrical
shock, disconnect the electrical supply to
the oven.
5. Replace the light bulb with a 40 watt
appliance bulb. Do not overtighten the bulb.
A bulb that has been over-tightened will be
difficult to remove.
6. Replace the light cover. Do not over-tighten
the bulb cover.
A cover that has been
over-tightened can become difficult to remove.
7. Replace the oven door.
8. Reconnect the electrical supply.
Before attempting to replace the bulb make
sure it is cool.
Wear protective gloves.
Do not operate the oven without the bulb
cover in