Testing Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power and gas to range before servicing,
unless testing requires power and/or gas.
16 16026785
© 2005 Maytag Services
M1 Control Testing Procedures
Control Feature
Test
Procedure
Results
M1 Oven
temperature
adjustment
Press
BAKE
pad.
Enter
550
on the digit pad.
Immediately press and hold
BAKE
pad for 3 to 5 seconds.
Oven can be adjusted from -35 to +35
degrees in 5-degree increments by
pressing
MORE+
or
LESS-
pads. To
avoid over adjusting the oven, move
temperature 5 degrees each time.
Wait 4 seconds for the data entry
timer to expire to accept the change.
Temperature adjustment will be
retained even through a power failure
.
Increasing or decreasing oven
temperature does not affect self-cleaning
temperature.
M1 Temperature
display
Press and hold
CANCEL
and
BAKE
pads for 3 to 5 seconds. Press
MORE+
or
LESS-
pads to change.
This mode enables the user to indicate
°F or °C on the display.
M1 Clock
display Press and hold
CANCEL
and
CLOCK
pads for 3 to 5 seconds.
Allows clock to be toggled On or OFF.
M1 24-hour
clock Press and hold
CANCEL
and
DELAY
pads for 3 to 5 seconds. Press
MORE+
or
LESS-
pads to change.
Allows the time on the clock to be
toggled from 12-hour or 24-hour display.
M1 Factory
default
Press and hold
CANCEL
and
KEEP
WARM
pads for 3 to 5 seconds.
Allows the clock to be reset to factory
settings.
M1
Twelve hour off
Control automatically cancels cooking
operation and removes all relay drives
12 hours after the last pad touch.
See Sabbath mode to disable.
M1 Sabbath
mode
Hold
CLOCK
pad for 3 to 5 seconds to
activate Sabbath mode.
Hold
CLOCK
pad for 3 to 5 seconds to
disable Sabbath mode.
Desired bake function must be initiated
before entering Sabbath mode.
"SAb" flashes for 5 seconds, then
remains on until timed-out or cancelled.
The status SAb is not fault code 5Ab.
All pad inputs are disabled except for
CANCEL
and
CLOCK
pads.
This mode disables the normal 12 hour
shutoff to allow operation of the bake
mode for a maximum of 72 hours.
The oven light is not disabled.
M1 Child
lockout Press and hold
CANCEL
and
COOK
& HOLD
pads for 3 to 5 seconds until
beep sounds.
To reactivate the control, press and
hold
CANCEL
and
COOK & HOLD
pads
for 3 to 5 seconds.
This safety feature prevents children
from accidentally programming the oven.
The electronic oven control is disabled.
Child lockout features must be reset after
a power failure.
M1 Diagnostic
code
display
Press and hold MORE+ pad within 30
seconds of powering up the unit.
Cycle through the codes using the
MORE+
or
LESS-
pads.
The last 5 diagnostic codes are stored in
the non-volatile memory.
See
"
Description of Error Codes
"
for
explanation.