2
www.amana-hac.com
SS-ACVC96
SS-ACVC96
www.amana-hac.com
3
¹
Natural Gas BTU/h
²
DOE AFUE based upon Isolated Combustion System (ICS)
³
Installer must supply one or two PVC pipes: one for combustion air (optional) and one for the flue outlet (required).
Vent pipe must be either 2" or 3" in diameter, depending upon furnace input, number of elbows, length of run and installation (1 or 2 pipes). The optional Combustion Air Pipe is
dependent on installation/code requirements and must be 2" or 3" diameter PVC.
⁴
Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs
will require larger wire sizes.
⁵
Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of the same size as noted.
Notes
•
All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
•
Gas Service Connection ½" FPT
•
Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.
•
For bottom return: Failure to unfold flanges may reduce airflow by up to 18%. This could result in performance and noise issues.
•
For servicing or cleaning, a 24" front clearance is required. Unit connections (electrical, flue and drain) may necessitate greater clearances than the minimum clearances listed
above. In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater.
ACVC96
0403BNA
ACVC96
0603BNA
ACVC96
0804CNA
ACVC96
1005CNA
ACVC96
1205DNA
Heating Data
High Fire Input¹
40,000
60,000
80,000
100,000
120,000
High Fire Output¹
38,400
57,600
76,800
96,000
115,200
Low-Fire Steady-State Input¹
28,000
42,000
56,000
70,000
84,000
Low-Fire Steady-State Output¹
26,880
40,320
53,760
67,200
80,640
AFUE²
96
96
96
96
96
Temperature Rise Range (°F)
20 - 50
35 - 65
25 - 55
45 - 75
35 - 65
Vent Diameter³
2" - 3"
2" - 3"
2" - 3"
2" - 3"
2" - 3"
No. of Burners
2
3
4
5
6
Circulator Blower
Available AC @ 0.5" ESP
1.5 - 3
1.5 - 3
1.5 - 4
2 - 5
2 - 5
Size (D x W)
10" x 8"
11" x 8"
11" x 10"
11" x 10"
11" x 11"
Horsepower @ 1075 RPM
½
½
¾
1
1
Speed
VS ECM
VS ECM
VS ECM
VS ECM
VS ECM
Electrical Data
Min. Circuit Ampacity⁴
7.8
7.8
10.6
14.4
14.4
Max. Overcurrent Device (amps)⁵
15
15
15
20
20
Shipping Weight (lbs)
116
119
143
145
158
Product Specifications
