MM-315B
1. Special Notes
1-2
Never disassemble, repair or modify the device.
These actions can cause electric shock and fire. Do not do anything other than
the maintenance described in the operation manual.
Do not insert your fingers or hands between the electrodes.
When welding, keep your fingers and hands away from the electrodes.
Do not touch any welded part or electrode during welding or just after
completion of welding.
The welded parts of a workpiece, electrodes, and the arm are very hot.
Do not touch them; burns may result.
Apply the specified supply voltage.
Application of a voltage outside the specified range may result in fire or electric
shock.
Use the specified cables and connect them securely.
Failure to do so or improper connection may result in a fire or electric shock.
Keep the power and connection cables free of damage.
Do not walk on, twist or tug the cables.
Damaged cable may result in an electric shock, short circuit, or fire.
For repair or replacement, contact your dealer or Amada Miyachi Co., Ltd.
Stop the operation if any trouble occurs.
Continuous operation after occurrence of a trouble such as burning smell,
abnormal sound, abnormal heat, smoke, etc. can cause electric shock and fire.
If such a trouble occurs, immediately consult Amada Miyachi Co., Ltd. or your
distributor.
Persons with pacemakers must stay clear of the welding machine.
A person who uses a pacemaker must not approach the welding machine or
walk around the welding shop while the welding machine is in operation,
without being permitted by his/her doctor. The welding machine generates a
magnetic field and has effects on the operation of the pacemaker while it is
turned on.
Protective gear must be worn.
Put on protective gear such as protective gloves, long-sleeve jacket, leather
apron, etc. Spatters can burn the skin if they touch the skin.
Wear protective glasses.
If you look at the flash directly during welding, your eyes may be damaged.
If any spatter gets in your eye, you may lose your eyesight.
DANGER
WARNING