background image

99-TRLSLV 

Adventurer Trailer Kit

1. Tips and Tricks

------------------------------------

2. Tools

-----------------------------------------------

3.  System Overview

 

----------------------------------


4.  Bill Of Materials

 

------------------------------------

    
5.  Installation: Battery Bank

 

-------------------------

   
6.  Installation: Solar Charging 

 

----------------------

   
7.  Installation: Alternator Charging & Boost

 

-------

    
8.  Installation: AC Input and Output

----------------


9.  Installation: DC Distribution

 

----------------------

10.  Programming & Commissioning Your System

Helpful tips and suggestions to ensure a successful installation and give you an 
accurate understand of what you are getting yourself into

Diagram showing all of the various components, cables & connectors, detailing 
connections for each subsystem in the kit

Complete bill of materials broken down by subsystem listing quantities, part 
numbers and descriptions with QR codes to link data sheets for major 
components

Detail of the Battery Bank subsystem connections and components

Detail of the Solar Charging subsystem connections and components

Tool suggestions to prepare for the work ahead along with some friendly advice

Detail of the Alternator Charging subsystem connections and components

Detail of the AC Input and Output subsystem connections and components

Detail of the DC Distribution subsystem connections and components

Detail of how to program the various different components of your system

Table of Contents

AM Solar Inc.

3555 Marcola Rd.

Springfield, OR 97477

541.726.1091

www.amsolar.com

Rev.20181204

Summary of Contents for 99-TRLSLV
















Reviews: