Outboard Racing Starting Clock
User Manual
Optional Relay Outputs:
Relay outputs to operate auxiliary devices. Relay output A is
programmed to come on at 1 minute and remain on until the timer
reaches zero. Relay output B is programmed to come on at 3 seconds
before zero and remain on until 3 seconds after the timer reaches zero.
•
Press and hold the
V1 Min
button for approximately 2 sec to enter
Relay Set Mode, display will show
rl00
.
•
Tap the
3 Min
button to toggle relay B on and off manually. The
display will show
rL01
for ON and
rL00
for OFF.
•
Tap the
1 Min
button to exit the relay test mode.
Setup Baud Rate:
Setup the serial port baud rate for radar gun input or output to auxillary
devices or to a computer.
•
Press and hold the Test/Setup button for approximately 2 sec to
enter Setup Mode, display will show
d09
.
•
Within one second
, tap the Test/Setup button
three
more times. The
display will show
b1
.
•
Wait for at least 2 seconds.
•
Press Test/Setup button successively to change the baud rate. The
display will show
b0
through
b7
•
Mode
b0
(Baud 1,200) – Use this baud rate when connecting a
radar gun to the serial port. Most radar guns use 1,200 baud. Some
use 9,600 baud. Check the manual.
•
Mode
b1
(Baud 2,400) – This is the default baud rate for most
Alzatex display devices.
•
Mode
b2
(Baud 4,800) –
•
Mode
b3
(Baud 9,600) – Used by some radar guns.
•
Mode
b4
(Baud 19,200) –
•
Mode
b5
(Baud 38,400) –
•
Mode
b6
(Baud 56,800) –
•
Mode
b7
(Baud 115,200) –
Protective Cloth Casing:
•
Store disassembled display digits in blue cordura protective cloth
covers
6
Alzatex, Inc.
