Alzatex DSP3603A, User Manual

Page: 5 / 7

Outboard Racing Starting Clock User Manual
Min Mode
Min to Sec Mode
Setup Timer Mode:
Display minutes: seconds or seconds.tenths of a second.
•
Press and hold the Test/Setup button for approximately 2 sec to
enter Setup Mode, display will show
d09
.
•
Within one second , tap the Test/Setup button one time. The display
will show
u..1
.
•
Wait for at least 2 seconds.
•
Tap Test/Setup button to change the display mode. The display will
show
u..0
through
u..1
•
Mode
u..1
(Min Mode) – While timer is running the display
shows M:SS, when timer reaches 0 the display will show dashes for
approximately 5 sec then go blank
•
Mode
u..0
(Min to Sec Mode) – While timer is running with more
than 1 min left the display shows M:SS, when timer reaches 59.9
sec the display switches to show SS.T, when timer reaches 0 the
display will show dashes for approximately 5 sec then go blank
Setup number of display digits:
Enable serial data output to auxiliary devices or to a computer.
•
Press and hold the Test/Setup button for approximately 2 sec to
enter Setup Mode, display will show d09 .
•
Within one second , tap the Test/Setup button two times. The display
will show
E4
.
•
Wait for at least 2 seconds.
•
Press Test/Setup button successively to change the number of
display digits. The display will show
E2
through
E4
•
This display should be left at 4 digits (
E4
mode).
Setup Serial Data Output:
Enable serial data output to auxiliary devices or to a computer.
•
Press and hold the Test/Setup button for approximately 2 sec to
enter Setup Mode, display will show d09 .
•
Within one second , tap the Test/Setup button two times. The display
will show
F3
.
•
Wait for at least 2 seconds.
•
Press Test/Setup button successively to change the display mode.
The display will show
F0
through
F3
•
Mode
F0
(Off) – No serial data output is generated.
•
Mode
F1
(Beep at timer zero) – When the timer reaches zero, a
beep command is generated.
•
Mode
F2
(Timer Status) – New data is output once per second
or ten times per second if running in tenths mode representing the
timer status.
•
Mode
F3
(Timer Status,Beep at timer zero) – Combines both
Beep output and timer status output.
www.alzatex.com 5 Alzatex, Inc.