12
7
Replacing the Blades
WARNING!!
Rollers
can cause injuries!
Before replacing the blades, disconnect the machine from the plug and wait until the
roller stops rotating.
Use work gloves when replacing.
1.
Remove the screw [1] under the undercarriage (Fig.8).
2.
Lift the roller [3] at an angle and pull it
out (fig.9).
3.
Remove the bearing housing [2] from
the roller shaft (Fig. 9).
4.
Slide the bearing housing [2] onto the
second roller.
5.
Slide
the second roller onto the drive
shaft so that the pin [5] fits into the
corresponding part in the drive shaft [4]
(Fig. 10).
6.
Screw the bearing housing [2] to the
bottom of the housing without over
tightening
it.
