10
6
Machine Assembly
1.
Tighten the lower part of the handle (Fig. 2
item 7) with the screw (Item 14). Use the
height adjustment (point 17) to set the
required handle height.
2.
Screw on the middle part of the handle,
using the quick
-
release lever and the handle
screw (Fig. 3).
3.
Screw on the upper part of the handle (Fig. 4).
4.
Attach the cable to the handle using the cable clip (Fig. 5).
5.
Insert the metal frame [10] into the basket
[9] and attach all the clips to the left, right
and rear side of the frame bar. Make sur
e
that all clips are properly secured (Fig. 6).
