LP2 Surface/Wall Installation Guide
10 of 12
102-000027 - IG121818-A.0
Connect wiring quick-connects between sections. Match
each color, as shown.
NOTE:
Color combinations may
vary.
32
Connect Wiring Between Sections
Tighten set screws to secure outer corner bracket to
joined section using a 1/8” hex key. Ensure each section
is properly aligned and that there are no gaps between
sections.
30
Tighten Set Screws on Outer Corner
Tighten joiner screws, as shown. Ensure each section is
properly aligned, and that there are no gaps between
sections.
31
Tighten Joiner Screws on Inner Corner
Installation: Connecting Multiple
Sections
Tighten joiner set screws, as shown, using a 5/64” hex key
for the sides and a 1/8” hex key for the bottom. Ensure
each section is properly aligned, and that there are no
gaps between sections.
28
Tighten Joiner Set Screws
29
Mitered Corners: Join Sections
Join sections together, as shown, ensuring correct align
-
ment. See final/record drawing for more details.
Loosen set screws and slide out joiner bracket halfway
to allow for joining. Join sections together, as shown,
ensuring correct alignment. See final/record drawing for
more details.
27
Align and Join Sections Together
