Alvarion BreezeMAX PRO 5000 CPE, Product Manual

Page: 90 / 116

Chapter 4 - Operation ATPC Parameters
BreezeMAX PRO 5000 CPE 73 Product Manual
4.9.2 ATPC
From the ATPC page, you can enable/disable the ATPC mechanism and select
your country code.
4.9.2.1 ATPC
1
Select Disable to temporarily disable ATPC for testing purposes. You will be
prompted to enter the requested Tx Power. The available range depends on
unit type/radio band.
The default Tx Power is the last power level used before the ATPC algorithm
was disabled.
2
Click Apply.
3
Upon completing the test, enable ATPC to resume normal operation. If not
enabled manually, ATPC will be enabled automatically after the next reset or
when closing the web interface.
4.9.2.2 Country Codes
The country codes can be configured using two methods:
Figure 4-15: Multi rate and ATPC Parameters Page
To enable/disable the ATPC mechanism:
IMPORTANT
The maximum Tx power may vary depending on the country code applied and on applicable
regulations.