Alvarion BreezeACCESS VL 5.4, System Manual

Page: 58 / 157

BreezeACCESS VL System Manual
4-12
LINK Self test and end-to-end
Ethernet connectivity Off – No Ethernet connectivity has been detected
between the outdoor unit and the device connected to the
indoor unit.
Orange– Self-test passed and Ethernet connection is
confirmed by the outdoor unit (Ethernet integrity check
passed).
Table 4-7
:
BS-AU-VL LEDs
Name Description Functionality
W-LINK
Wireless link activity Green – At least one SU is associated.
Blinking Red – No SU is associated.
Off – Wireless link disabled.
ODU CURRENT
CONSUMPTION Current Consumption of
the Outdoor Unit
Red – over current.
Blinking Red – open circuit or below anticipated current
consumption.
Green – within tolerance.
ODU STATUS Outdoor Unit Self-test
Green – Self test passed and ODU ready for operation.
Blinking Amber – Testing (not ready for operation)
Red - fatal failure.
IDU PWR Power indication for the
Indoor Unit
Green – IDU power OK.
Off – no power is supplied to the IDU.
ALARM Indoor Unit Alarm
Indication Red – a fatal failure indication.
Off – IDU is functioning properly.
Verifying the Ethernet Connection
Once you have connected the unit to an Ethernet outlet, verify that the
Ethernet Integrity Indicator, which is the yellow LED embedded in the
10/100 BaseT connector, is On . This indicates that the unit is connected
to an Ethernet segment. The Ethernet Activity Indicator, which is the green
embedded LED, should blink whenever the unit receives or transmits
traffic on the
10/100 BaseT port.
Verifying the Indoor-to-Outdoor
Connection (Modular Base Station)
Once you have connected the unit to an Ethernet outlet, verify that the
Ethernet Integrity Indicator, which is the yellow LED embedded in the
RADIO connector, is On . This indicates that the unit has detected an
Ethernet link connection. The Ethernet Activity Indicator, which is the
green embedded LED, should blink whenever the unit receives or
transmits traffic on the
RADIO port.