Supervisor 3500 Installation Instructions
Page 28
For assistance: [email protected] +1 (909) 591-8431 PUD3673R1-1
Testing Lane Key Control (Optional)
Optional 3-position lane key control switches can be selected
during the ordering process. Lane key control switches are used
to change passage modes for both directions of travel. Two (2)
lane key control switches are installed per turnstile in the bottom
end legs as shown in [Figure 25].
Turning the key to one of three positions overrides all existing
settings, placing the turnstile in Controlled Passage mode,
Free Passage mode or No Passage mode depending on the
orientation of the key. Refer to the Passage Modes section on
Page 24 for more information.
The keys to the lane key control switches are packaged in the
hardware box that was shipped with the turnstile.
Fig. 26
Lane
Key
Control
Switch
Secured Side
Unsecured Side
Controlled
Passage
Mode
Free
Passage
Mode
No
Passage
Mode
NOTE
Fig. 25
Lane Key Control Switch Locations
Lane Key Control Switch
Lane
Key
Control
Switch
