PUD4146R1-0
For Assistance: [email protected] +1 (909) 591-8431
Page 25
EDM Installation and Maintenance Instructions
Appendix A - Setting the Home Position
1. Identify the control board attached to the inside
surface of the lid [Fig. 16A]. The (D2) LED will be
blinking indicating normaloperation mode.
2. Press and hold the 'Test Mode' button for 2
seconds. The (D2) LED will be lit solid. This
indicates the turnstile is in Test Mode [Fig. 16a].
3. Hold arm and rotate 3 times in either direction.
4. Return arm to center position.
5. Press the 'Home' button to set.
6. Press and hold the 'Test Mode' button for 2
seconds. The (D2) LED will return to blinking
status indicating normal operation mode.
Fig. 16
Fig. 16a
NOTE
Power must be on.
