PUD4146R1-0
For Assistance: [email protected] +1 (909) 591-8431
Page 23
EDM Installation and Maintenance Instructions
Maintenance
Preventative maintenance should be performed periodically after installation to ensure the product maintains its
visual exterior and optimal performance. To maintain the EDM, follow the instructions below as needed.
Cleaning the Cabinet Exterior
Regular cleaning is the best way to maintain any stainless steel or finished equipment and prevent corrosion.
1. Stainless steel surfaces may be cleaned using any commercially available stainless steel cleaner or polish.
If a heavier scratch mark is apparent, a metal blend and finish pad by 3M Company or equivalent may be used
followed by a stainless steel cleaner. ALWAYS POLISH IN THE DIRECTION OF THE GRAIN.
2.
Powder coat finishes may be cleaned using a soft damp cloth. Any deep scratch in this type of finish should be
touched up to prevent rust and corrosion from forming. If left untreated, rust can spread under the powder coat
finish.
Interior Maintenance
Internal maintenance should occur every year. Dust build up is the most important concern inside the cabinet. Use
canned air dust remover to clean out all the dust from the inside of the cabinet and off the printed circuit boards.
