Page 20
For Assistance: [email protected] +1 (909) 591-8431 PUD4146R1-0
EDM Installation and Maintenance Instructions
Remote 3-Way Switch (Optional)
A three-position key switch can be provided that allows the turnstile to be placed in one of the three available
passage modes: Controlled, Free, or No Passage. A key switch is required for each direction of operation. RKO-3
key switches are provided loose, for installation in a location remote from the turnstile. This option is separate from
the two-position key override that is installed in the turnstile cabinet.
User Status and Open / Close Lights (Optional)
The EDM can be equipped with User Status lights. The User Status lights are installed flush under the turnstile lid and
are configured to function in the following manner [Fig. 14]:
•
Yellow - The turnstile is locked in Controlled Mode ready for a valid card presentation.
•
Green - When the green light illuminates, the turnstile is unlocked and ready for passage. The access
control system has provided the turnstile control board with an "authorized" input. This light flashes when
in Free Passage Mode.
•
Red - The access control system provided the turnstile control board an "unauthorized" input, in which case
the turnstile remains locked. This light is solid when in No Passage Mode. This light also flashes if the
moving arms impact an object during rotation or if the arm is forced to move without an activation, called
"breakaway".
The EDM can also be equipped with Open / Close lights. The lights are installed on the upper "leg" of the cabinet and
perform in the following manner [Fig. 14]:
•
Green - Illuminates when the turnstile is open for use.
•
Red - Illuminates when the turnstile is closed for use and activation inputs are ignored. It also illuminates
solid if the moving arms encounter an impact or a breakaway.
Open / Close
Lights
User Status Lights
Fig. 14
