Alva MPO 5500, User Manual

Page: 43 / 110

Using the Phone 42
8.2 Making a phone call
1. Make sure that the phone module is switched ON. See
section “8.1 Switching ON the phone module”.
2. Press [ Programs ].
3. Use [ Cursor Left/Right ] to select Phone .
4. Press [ OK ]. The
NETWORK CHECK
message will appear.
The MPO will now try to establish a network connection. If
a successful network connection is established, the name
of a service provider will appear.
5. Press [ OK ]. The PHONE CATEGORIES list will appear.
Read below for instructions on how to choose a telephone
number.
If the phone is switched OFF and you press and hold
[
Connect ] for 2 seconds, the MPO will automatically try to
establish a network connection enabling you to skip a few
steps in making a phone call.
8.3 Choosing a telephone number
To place a call, you can either dial a number manually or
choose from one of the following options:
Contacts , Missed
calls , Received calls or recently Dialed numbers . Choose the
option of your preference.
8.3.1 Manual dial
1. Use [ Cursor Up/Down ] to select New number.
2. Press [ OK ]. The
DIAL NUMBER
dialog will appear.
3. Type the telephone number.
4. Press [ OK ]. To place the phone call, see section “8.4
Completing a phone call”.