5
5.2 Manual adjustment of limit switches
•
Press «
P2
» key, then press «
▲
» and then press «
P2
» key again. Each key press will be followed by a short beep sound,
and the last key press will be followed by 3 short beeps, and the motor will make a short up/down movement.
•
Press «
▲
» key and then using the «
■
» key stop the roller shutter curtain in the desired upper limit position.
•
Press and hold «
■
» key for 5
seconds, the key press will be followed by 3 short beep sounds, and the motor will make a
short up/down movement.
•
Press «
▼
» key and then using the «
■
» key stop the roller shutter curtain in the desired lower limit position.
•
Press and hold «
■
» key for 5 sec
onds, the key press will be followed by 3 short beep sounds, and the motor will make a
short up/down movement.
•
The adjustment of limit switches completed.
•
Raise and lower the roller shutter curtain fully several times using the «
▲
»/ «
▼
» keys, make sure the
curtain travels
smoothly and the upper and lower limit positions are set correctly.
5.3 Intermediate (third) limit position
Any position of the curtain between the upper and lower limit positions can be set as an intermediate (third) limit position.
•
Using
the «
▲
»/«
▼
» and «
■
» keys, set the roller shutter curtain in the position to be memorized.
•
Press «
P2
» key, then press «
■
» and then press «
■
» again and hold it for 5 seconds. Each key press will be followed by a
short beep sound, the last press will be followed by 3 short beep sounds, and the motor will make 3 short reverse
movements.
5.4 Deleting all limit positions
All limit positions are deleted simultaneously.
•
Press «
P2
» key, then press «
▼
» key and then press «
P2
» key again. Each key press will be fo
llowed by a short beep
sound, and the last key press will be followed by 3 short beep sounds, and the motor will make one short reverse
movement.
6. SETTING ADDITIONAL OPTIONS
6.1 Option of protection against freezing of the curtain in the down position (activated by default)
The option is intended to protect the roller shutter system in cases when the lower part of the curtain is frozen to the base
surface. When this option is activated, the curtain does not go up in case additional resistance is detected in the lower part
of the curtain.
•
Press «
P2
» key, then press «
▼
» and then «
▲
» keys. Each key press will be followed by a short beep sound,
and the last
key press will be followed 1 short beep and the motor will make either 1 short reverse movement (
option deactivated
) or 3
short beeps and the actuator performs 3 short reverse movements (
option activated
).
6.2 Option of detecting obstacles during up/down movement of the curtain (activated by default)
The option is intended to protect the roller shutter system from damage in case of an obstacle in the area of movement of
the roller shutter curtain. When this option is activated, if the moving curtain meets an obstacle, the curtain stops in case it
was moving up, and if the curtain was moving down, the motor reacts according to the settings described in section 6.3.
•
Press «
P2
» key, then press «
■
» and then «
▼
» keys. Each key press will be followed by a short beep sound,
and the last
key press will be followed 1 short beep and the motor will make either 1 short reverse movement (
option deactivated
) or 3
short beeps and the actuator performs 3 short reverse movements (
option activated
).
The option of detecting obstacles is not a guarantee of safety
for life and health of people and animals!
PROHIBITION! Do not allow people and animals to the area of the curtain movement!
EN
Summary of Contents for AM1/10-15RS
Page 50: ...49 ...
Page 51: ...50 03 03 2021 ...
