Aluratek CDM530AM, User Manual

Page: 35 / 69

3.2.1.3 Wireless Settings
Wireless settings allow you to set the wireless configuration items.
1.
Wireless: Enabled
is the
default .
Selecting this option will allow you to set your
Wireless Access Point (WAP) settings.
2.
Wireless Operation Mode:
Choose AP mode or Client mode. The factory default
setting is AP mode.
3.
Network ID(SSID):
Service Set Identifier (SSID) is the name designated for a
specific wireless local area network (WLAN). The SSID's factory default setting is
default
. The SSID can be easily changed to establish a new wireless network.
( Note: SSID names may contain up to 32 ASCII characters).
4.
SSID Broadcast :
The router will broadcast beacons that have some information,
including ssid so that wireless clients can know how many AP devices by
scanning function in the network. Therefore, this function is disabled; the wireless
clients can not find the device from beacons.
5.
Channel:
Auto is the default. Devices on the network must share the same
channel. (Note: Wireless adapters automatically scan and match the wireless
settings. You may also select the channel you wish to use).
6.
Wireless Mode: Choose B/G Mixed, B only, G only, N only, G/N Mixed or B/G/N mixed .
The factory default setting is B/G/N mixed .
7.
Authentication mode:
You may select from nine kinds of authentication to secure
your wireless network: Open, Shared, Auto, WPA-PSK, WPA, WPA2-PSK, WPA2,
WPA-PSK/WPA2-PSK, WPA/WPA2.