Aluratek CDM530AM User Manual Download Page 28

Page: 28 / 69

outgoing packets.

Auto Reconnect

(

Always-on): The device will link with ISP until the connection is

established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page

4.3 PPP over Ethernet

1. PPPoE Account and Password: the account and password your ISP assigned to

you. For security, this field appears blank. If you don't want to change the password,
leave it empty.

2. Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send

outgoing packets.

Auto Reconnect

(

Always-on): The device will link with ISP until the connection is

established.

Manually: The device will not make the link until someone clicks the

connect-button in the Status-page.

3. Maximum Idle Time: the amount of time of inactivity before disconnecting your

PPPoE session. Set it to zero or enable Auto-reconnect to disable this feature.

4. PPPoE

Service

Name: optional. Input the service name if your ISP requires it.

Otherwise, leave it blank.

5. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The

default MTU value is 0(auto).

Summary of Contents for CDM530AM






































































Search results

Summary of Contents for CDM530AM

Reviews:

Related manuals for CDM530AM

Brands by name

Popular brands

Aluratek CDM530AM, User Manual

Search results

Summary of Contents for CDM530AM

Reviews:

Related manuals for CDM530AM

Brands by name

Popular brands