5. If using camera or user management features
, internet access is required. In order to access
the internet your BAT-Connect must be connected via ethernet or Wi-Fi. In addition you must
log in to the Alula platform using the account owner user name and password. To log in go to
Settings and select Touchpad. Enter master code, then select Alula Cloud.
6. Test the Touchpad
by arming and disarming the system from the Touchpad.
Touchpad Mounting
1. Open the enclosure
by lifting at the single point with a flathead screw driver at the location
shown below.
2. Remove the display
by pulling it out of the back plastic.
3. Mount the enclosure to the wall
using the screw holes in the enclosure.
Insert the wall
anchors prior to securing the screws in place.
Mounting Holes
Display
