Pro Tips
The Touchpad display turns off on its own
after specified allotted time of inactivity
(Auto sleep display setting). It will turn back on when the screen is touched, or for some
alarm conditions. The screen can also be turned off manually by pressing "Sleep
."
The Touchpad volume can be changed
in the Settings screen
.
The physical volume rocker
switch on the top left side of the Touchpad is
not
enabled.
The Touchpad can be rebooted
by holding the power button on the top left side of the
display for several seconds; however, this should never be required.
To unenroll the Touchpad
navigate to the Settings menu and then to the section labeled
"Panel." Put the panel or BAT-Connect into wireless enrollment mode and press the
unenrollment button. Note: The unenrollment button is displayed only when the panel is in
enrollment mode.
When adding display
into enclosure, camera should be on the left side.
USB connector
Camera
