29
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Netti Rullestoler
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
With or without companion – forwards.
Before transfer:
• The wheelchair should be placed as
close as possible to the destination
of the transfer.
• Pull the wheelchair backwards 5-10
cm in order to make the front
castors turn forward.
• Lock the brakes.
Using a lift:
Before transfer to chair:
• Remove the foot supports
• Open the back rest angle slightly
• Replace the components when
transfer is finished.
Never stand on the foot plates
without making sure that they are
touching the ground due to the risk
of tipping the chair forwards.
8.8 Point of balance
Adjust the point of balance by changing the
position of the main wheel in the main wheel
bracket.
• Move the main wheel hub and the
main wheel. (Chapt. 6.6)
• Adjust the brakes. (Chapt. 6.15)
2 pcs 24 mm open-end spanner
5 mm Allen key
When the main wheels are moved forward, it
will be easier to manoeuvre the wheelchair,
but the risk of tipping backwards increases.
The point of balance can also be
changed by adjusting the seat angle
and/or angle of back rest.
It is recommended to use the anti tip.
Check that the main wheel and quick
release are locked properly. (Chapt
6.2)
d
8.9 Lifting the wheelchair
• The wheelchair should be lifted in the
frame, push bar and push handles only
It is marked with the above symbol where
it should be lifted
Never lift the wheelchair by the foot
supports or arm supports
.
e 21
