23
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Netti Rullestoler
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Adjusting the length of the foot support
• Untighten the screw (A) to make the
adjustment tube move.
• Adjust the foot support in required position
and fix the screw properly.
Adjusting the angle of the foot plate
• The foot plates can be adjusted in angle
• Untighten the screw (B) and adjust the
foot plate to the required angle. Fix the
screw properly (Ill. 6.14.1.).
Ill. 6.14.1
5 mm Allen key
While making the adjustment there
must be no load on the foot plates.
For outdoor use, there should be a
clearence of 4 - 5 cm between the
foot plate and the ground
Removing the foot support
• Take the foot support off by pulling it up
and swinging it out (Ill. 6.14.2)
Ill. 6.14.2
Never stand on the foot supports!
Never lift the wheelchairs by the
foot supports.
6.15 Adjusting the brakes
• The brakes are freely adjustable along
the frame tube.
• To activate the brake, push the handle
forward (Ill. 6.15.1)
Ill. 6.15.1
