20
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Language:
English
Model:
Netti I allround
Version:
November 2010
Netti Rullestoler
By using the adjustment strap in the
rear you can gain a few cm on the
depth
When adjusting the seat depth at the
rear the screw in the back rest hinge
must be tightened with 14 Nm.
6 mm Allen key
13 mm open-end spanner
When changing seat depth, you also
change the tipping point of the chair.
This can be prevented by changing the
position of the main wheel in the main
wheel bracket. (See chapter 6.6).
6.9 Adjusting seat depth at
the front
It is possible to adjust the seat depth up to 10
cm at the front. Do the following:
• Unfix the screw holding the pull out piece
for the foot support
• Set the pull out piece to the required
position
• Fix the screws, tighten them with 25 Nm
6mm Allen key
By setting the pull out pieces to
different positions, it is possible to
compensate for a rotated pelvis or
different length of thighs.
6.10 Anti tip
• Adjust the anti tip so that it doesn’t stick
outside the radius of the wheel.
• Pull the anti tip out / rearwards from
chassis.
• Turn it down 180°.
• Lock it in position by moving forwards with
spring tension.
The anti tips are delivered adjusted
according to ordered main wheel size
in standard position. If other adjust-
ments are carried out, anti-tips have
to be adjusted accordingly.
Adjusting anti tip
The anti tips must be adjusted whenever
position or dimension of main wheels is
changed.
