Chapter 6. Out of Band Operation
55
4. For the
Connect using:
field, select
Direct to COM1
(assuming you are
using COM1 on your PC), then click
OK
. A
Port Setting
dialog box
similar to the one below comes up:
5. For OOBC connections, the SN0108 / SN0116's serial port settings and the
computer's COM port settings must be the same. Change the settings in
your dialog box (if necessary), so that they match the SN0108 / SN0116's
Console Port settings (see
, page 31, for details), then click OK.
Note:
The SN0108 / SN0116's default settings are 9600 bps; 8 Data bits;
No Parity; No Stop bits, but you can change these to something more
suitable to your installation as long as they both match.
sn816.book Page 55 Thursday, January 8, 2009 4:56 PM
