Altusen KN9000, User Manual

Page: 61 / 76

A description of the items is given in the table, below:
Item Expalanation
New search This is one of three radio buttons that define the scope of the
search. If it is selected, the search is performed on all the
events in the database for the selected KN9000.
Search last results This is a secondary search performed on the events that
resulted from the last search.
Search excluding last
results This is a secondary search performed on all the events in the
database for the selected KN9000 excluding the events that
resulted from the last search.
KN9000 List: KN9000 units are listed according to their IP address. Select
the unit that you want to perform the search on from this list.
You can select more than one unit for the search. If no units
are selected, the search is performed on all of them.
Priority Sets the level for how detailed the search results display
should be. 1 is the most general; 3 is the most specific.
Start Date Select the date that you want the search to start from. The
format follows the MM/DD/YYYY convention, as follows:
05/11/2002
Start Time Select the time that you want the search to start from. The
format follows the HH:MM:SS convention, as follows:
13:45:08
End Date Select the date that you want the search to end at.
End Time Select the time that you want the search to end at.
Pattern Key in the pattern that you are searching for here. The
multiple character wildcard (%) is supported. E.g., h%ds
would match hands and hoods.
Results Lists the events that contained matches for the search.
Search Click this button to start the search.
Print Click this button to print the search results.
Exit Click this button to exit the Log Server.
2004-05-04
51