Altusen KN9000, User Manual, Page: 29 / 76

Filtering:
M
There are a maximum of 100 filters allowed for each category (User IPs,
User MACs, and Administrator MACs).
M
To enable filtering for User Stations, Click to put a check mark in the IP
and/or MAC Filter enable checkbox.
M
To add a filter, Click Add. Adialog box similar to the ones below appears
(the top example is for IP address filters; the bottom is for MAC address
filters):
M
Specify the filter address in the dialog box, then Click OK.
M
Each filter can consist of a single IP or MAC address, or a range of IP
addresses. For a single IP address filter, the address is the same for both the
From and To fields.
M
To delete a filter, select it and Click Remove; To modify a filter, select it
and Click Edit. The Edit dialog box is similar to the Add dialog box. When
it comes up, simply delete the old address and replace it with the new one.
2004-05-04
19