Invoking Auto Scan:
To start Auto Scanning, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 17).
2. Press [A].
After you press A, you automatically exit Hotkey Mode; enter Auto Scan
Mode; and Auto Scanning begins.
w
While you are in Auto Scan Mode, you can pause the scanning
operation in order to keep the focus on a particular computer by pressing
P or with a Left Click of the mouse. While Auto Scanning is paused, the
Command Line displays: Auto Scan: Paused.
Pausing when you want to keep the focus on a particular computer allows
you to resume scanning from where you left off. On the other hand, if you
were to Exit Auto Scan Mode and then resume scanning, you would start
over from the very first computer on the installation.
w
To resume Auto Scanning after Pausing, press any key or Left Click.
Scanning continues from where it left off.
w
While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant keystrokes
and mouse clicks can be input. You must exit Auto Scan Mode in order
to regain normal control of the console.
3. To exit Auto Scan Mode press [Esc] or [Spacebar]. Auto Scanning stops
when you exit Auto Scan Mode.
2003-07-25
20
Summary of Contents for KL0116
Page 24: ...Notes 2003 07 25 16...
Page 46: ...Notes 2003 07 25 38...
Page 52: ...Notes 2003 07 25 44...
