Chapter 4. VSR Archive Server
23
Archive Server GUI
The Archive Server’s interface has 5 tabs:
Playback
,
Export
/
Import
,
Storage
,
Settings
, and
License
; all described below. Once the software has been
installed, double click the
Archive GUI
icon located on the desktop, and the
Playback
page appears:
Use the
Exit
button to shutdown the Archive Server, or
Hide
button to
minimize the window to the task bar.
Setup
There are two steps to setup the Archive Server- set the Archive Server’s IP
address on the Primary VSR server, and add a storage location from the
Archive Server’s
Storage
tab.
First, configure the Archive Server’s IP Address on the Primary VSR Server
(see
, page 16). Next, add a storage location from the
Storage
, page 28). The storage location is where the archived video log
files are saved.
After the IP address is configured and a storage location is added, the Archive
Server will begin to automatically archive all video log files created after the
installation. The archive is updated every 15 minutes. To check for new video
log files, go to the
Playback
tab and click
Search
. All new video log files will
appear in the search window.