Trove1R Installation Guide
- 5 -
Z Bracket Installation for Trove1R:
Altronix Trove1R enclosure includes Z Bracket, a convenient and reliable wire management accessory.
Hardware
(included)
:
Ten (10) bolts and
eight (8) lock nuts.
1. Carefully unpack Z Bracket. Do not discard hardware
(included)
(Fig. 3, pg. 5)
.
2. Attach arms to each other using bolts and
lock nuts
(Fig. 3a, pg. 5)
.
3. Attach the hinge brackets to the ends of
arms using bolts and nuts positioning
them as shown on
(Fig. 3b, pg. 5)
.
4. Make sure that all nuts are tightened.
5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable slide using bolts and lock nuts
(included)
(Fig. 4, 4a, pg. 5)
.
6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts
(included).
Fig. 4
Fig. 4a
Fig. 3b
Two (2)
Fig. 3
Fig. 3a
