Maximal11DV / Maximal33DV / Maximal55DV / Maximal75DV / Maximal77DV Access Power Controllers (PTC) Installation Guide
- 3 -
MaximalDV Series Overview:
Altronix MaximalDV Access Power/Controllers distribute and switch power to access control systems and acces-
sories. They convert a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into sixteen (16) independently
controlled 12VDC or 24VDC PTC protected outputs. These Fail-Safe/Fail-Secure power outputs may be converted
to dry form “C” contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger
input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of
access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP
Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire
alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.
MaximalDV Series Configuration Chart:
Altronix
Model Number
Output Voltage Options
Total Output Current (16 outputs)
Current per ACM8CB Output
PTC Protected
Outputs
(auto-resettable)
220VAC 50/60 Hz Input (current)
Power
Supply
Board
Input
Fuse
Rating
Power
Supply
Board
Battery
Fuse
Rating
Power Supply 1 Power Supply 2
Maximal11DV
AL400XB2V
AL400XB2V
–
2.5A
16
2.4A
5A/
250V
15A/
32V
12VDC @ 3.5A
12VDC @ 3.5A
7A
12VDC @ 2.7A
24VDC @ 2.7A
5.4A
24VDC @ 3.5A
24VDC @ 2.7A
6.2A
Maximal33DV
AL600XB220
AL600XB220
–
2.5A
16
3A
5A/
250V
–
12VDC @ 5.5A
12VDC @ 5.5A
11A
12VDC @ 5.7A
24VDC @ 5.7A
11.4A
24VDC @ 5.5A
24VDC @ 5.7A
11.2A
Maximal55DV
AL1012XB220
AL1012XB220
19
2.5A
16
3A
5A/
250V
15A/
32V
12VDC @ 9.5A
12VDC @ 9.5A
Maximal75DV
AL1012XB220
AL1024XB2V
19
2.5A
16
5A
5A/
250V
15A/
32V
12VDC @ 9.5A
24VDC @ 9.5A
Maximal77DV
AL1024XB2V
AL1024XB2V
19.4
2.5A
16
6A
5A/
250V
15A/
32V
24VDC @ 9.7A
24VDC @ 9.7A
MaximalDV Series Features:
• Sixteen (16) independently trigger controlled outputs.
Output options:
a) Sixteen (16) Fail-Safe filtered and electronically regulated power outputs.
b) Sixteen (16) Fail-Secure filtered and electronically regulated power outputs.
c) Sixteen (16) form “C” relay outputs (rated @ 5A/28VDC or VAC).
d) Any combination of the above.
• Sixteen (16) Access Control System trigger inputs.
Input trigger options:
a) Sixteen (16) normally open (NO) dry trigger inputs.
b) Sixteen (16) open collector inputs.
c) Any combination of the above.
• Sixteen (16) unswitched filtered and electronically regulated aux. power outputs (outputs are rated @ 2.5A).
• Red LEDs on ACM8CB board indicate individual outputs are triggered (relays energized).
• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.
Fire Alarm disconnect input trigger options:
a) Normally open (NO) or normally closed (NC) dry trigger input.
b) Polarity reversal input from FACP signaling circuit.
• Green LED on ACM8CB board indicates FACP disconnect is triggered.
• FACP output relay indicates that FACP input is triggered (form “C” contact rated @ 1A/28VDC).
