Altronix eFlow4N8DV, Installation Manual, Page: 2 / 16

- 2 - eFlow6NV Series
Overview:
The eFlow6NV power supply/chargers convert a 220VAC (working range 198VAC - 256VAC), 50/60Hz input to a
12VDC or 24VDC nominal output (see Power Supply Configuration Reference Chart and Specifications).
eFlow6NV Series Power Supply Configuration Reference Chart:
Altronix Model Number
Nominal DC Outputs
Maximum Supply Current for Main and Aux. Outputs (amp) Input Rating: 220VAC, 50/60Hz Input Fuse Rating Battery Fuse Rating Ripple Voltage (mV)
Under low battery condition
Power Distribution Modiule Number of Outputs Fused Output Ratings PTC Output Ratings Accommodates up to 7AH Batteries Accommodates up to 12AH Batteries
[DC] [AUX]
12VDC Output Range (volts) 24VDC Output Range (volts) 12VDC Output Range (volts) 24VDC Output Range (volts)
eFlow6NV
10.0-
13.2
20.19-
26.4
10.03-
13.2
20.19-
26.4
6 2.1A 5A/250V 10A/32V 910 N/A 1
– –
3
–
eFlow6NXV – – –
3
eFlow6N8V
10.0-
13.2
20.19-
26.4
10.03-
13.2
20.19-
26.4
6 2.1A 5A/250V 10A/32V 910 PD8 8
2.5A –
3
–
eFlow6NX8V 2.5A – –
3
eFlow6N8DV
9.78-
13.2
20.0-
26.4
10.03-
13.2
20.19-
26.4
6 2.1A 5A/250V 10A/32V 910 PD8CB 8
– 2A
3
–
eFlow6NX8DV – 2A –
3
eFlow6N16V
10.0-
13.2
20.19-
26.4
10.03-
13.2
20.19-
26.4
6 2.1A 5A/250V 10A/32V 910
PD16W
16
2.5A –
3
–
eFlow6NX16V 2 - PD8 2.5A – –
3
eFlow6N16DV
9.78-
13.2
20.0-
26.4
10.03-
13.2
20.19-
26.4
6 2.1A 5A/250V 10A/32V 910
PD16WCB
16
– 2A
3
–
eFlow6NX16DV
2 - PD8CB
– 2A –
3
European Conformity
Stand-by Specifications:
Battery
Burg. Applications
4 hr. Stand-by/
15 min. Alarm
Fire Applications
24 hr. Stand-by/
5 min. Alarm
Access Control
Applications
Stand-by
7AH 0.4 amp/6 amp N/A 10 Mins./6 amp
12AH 1 amp/6 amp 0.3 amp/6 amp 25 Mins./6 amp
40AH (for eFlow6NXV refer to Fig. 8, pg. 10) 6 amp/6 amp 1.2 amp/6 amp Over 4 Hours/6 amp
65AH (for eFlow6NXV refer to Fig. 8, pg. 10) 6 amp/6 amp 1.5 amp/6 amp Over 4 Hours/6 amp
Specifications:
Input:
• 220VAC (working range 198VAC - 256VAC), 50/60Hz.
Output:
• For output voltage and supply current refer to eFlow6NV
Series Power Supply Configuration Reference Chart, pg. 2.
• Auxiliary output rated @ 1 amp (unswitched).
• Overvoltage protection.
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Maximum charge current 1.54 amp.
• Automatic switch over to stand-by battery when AC fails.
Transfer to stand-by battery power is instantaneous with
no interruption.
Fire Alarm Disconnect:
• Supervised Fire Alarm disconnect (latching or
non-latching) 10K EOL resistor. Operates on a normally
open (NO) or normally closed (NC) trigger.
Supervision:
• AC fail supervision (form “C” contacts).
• Battery fail and presence supervision (form “C” contacts).
Supervision
(cont’d)
:
• Low power shutdown. Shuts down DC output terminals
if battery voltage drops below 71-73% for 12V units
and 70-75% for 24V units (depending on the power
supply). Prevents deep battery discharge.
Fuse Ratings:
• Refer to eFlow6NV Series Power Supply Configuration
Reference Chart, pg. 2.
Visual Indicators:
• Green AC Power LED indicates 220VAC present.
• AC input and DC output LED indicators.
Additional Features:
• Short circuit and overload protection.
• Unit is complete with power supply, enclosure,
battery leads and cam lock.
Enclosure Dimensions
(approximate H x W x D)
:
eFlow6NV, eFlow6N8V, eFlow6N8DV,
eFlow6N16V, eFlow6N16DV:
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
eFlow6NXV, eFlow6NX8V, eFlow6NX8DV,
eFlow6NX16V, eFlow6NX16DV:
15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)