eBridge8PCRX
- 3 -
1. Attach mounting brackets to eBridge8PCRX unit for rack installation (Fig. 5, pg. 8).
Affix rubber pads to eBridge8PCRX for shelf installation (Fig. 6, pg. 8).
2. Unit should be located in proximity to ethernet switch/network, NVR or video server.
3. Connect UL Listed 48VDC/56VDC (attention to observe polarity) UL Listed power supply to jack marked [Input 1]
using two pin plug in connector (supplied) (Fig. 1, pg. 3). Use 22AWG-16AWG wire for this connection.
4. Connect structured cable from ethernet switch/NVR (network video server) to RJ45 jack marked [10/100BaseT]
(Fig. 1, pg. 3).
5. Connect Coax cable to BNC connector marked [Data In] (Fig. 1, pg. 2).
Note: The eBridge is designed to accommodate Megapixel, HD720, HD1080 and VGA (SD) cameras. It is important
to note that some high resolution and high frame rate cameras may demand faster headend processing ability, such as a
PC graphics card to present a quality image. If the headend processing equipment is insufficient in speed, the image may
show pixilation and latency. It is advisable to pretest system if unsure. Alternatively, frame rate and resolution may be
reduced to accommodate system equipment.
Technical Specifications:
Parameter
Description
Connections
BNC for Coax link. RJ45 for ethernet link.
Input power requirements 48VDC/6A, 56VDC/6A.
Indicators
Blue: Coax Link.
Yellow (RJ45 connector): On - Link, Off - No Link, Blinking - Activity.
Green (RJ45 connector): On - 100Base-TX, Off - 10Base-T.
Green: Power.
Environmental Conditions
Operating Ambient Temperature: UL60950-1 14ºF to 122ºF (-10ºC to 50ºC).
Relative humidity: 85%, +/ --- 5%
Storage Temperature: --- 4º to 158ºF (--- 20º to 70ºC) Storage
Operating Altitude: --- 1000 to 6,561.679 ft. (--- 304.8 to 2000m).
Regulatory Compliance
UL/CUL Listed for Information Technology Equipment (UL 60950-1). CE approved.
Weights (approx.)
Product: 6.0 lbs. (2.72 kg), Shipping: 8.0 lbs. (3.63 kg)
Fig. 1
Data In
Data In
1
2
3
4
5
6
7
8
Input 1
Structured Cable from
Ethernet Switch/NVR
Back of Unit
Front of Unit
48VDC/6A,
56VDC/6mA
10/100
Base-T
1
2
3
4
10/100
Base-T
5
6
7
8
Ethernet
--
+
Coax Cable from
eBridge1PCT
or eBridge1PCTX
