S9921A – Instruction Manual
20
【
Alarm output
】
Start the external equipment of corresponding linkage alarm
when the motion detect alarm is turned on.
【
Delay
】
Delay a few moments and stop when the alarm state is turned off.
The range is 10~300 seconds.
【
Record channel
】
Choose the recording channel (multiple option supportive).
Trigger the video signal when the alarm is turned on.
Note:
Set in the [record mode] and perform the linkage recording. Start
detecting video files in the corresponding time section.
【
PTZ Activation
】
Set the PTZ activation when the alarm is turned on.
Note:
PTZ activation is set in the [shortcut menu] >[ PTZ control]. Set the
patrol between spots, trail patrol and so on.
【
Delay
】
When alarm is over, recording will last some seconds(10~300sec),
then stop.
【
Show message
】
Pop the alarm information dialog box in the local host
computer screen.
【
Send EMAIL
】
means sending an email to user when the alarm is
turned on.
Note:
Set in the [Network service] and send email.
【
FTP upload
】
means upload the alarm images to your ftp when the alarm
is turned on.
