S9921A – Instruction Manual
17
【
Mode
】
Set video state: general
，
detect
，
alarm
，
event
，
stop.
General:
Perform the regular recording in the set time section.
Detect:
Trigger
the “motion detect”, “camera mask” or “video loss” signal.
When above alarm is set as opening recording,
the “detection recording” state
is on.
Alarm:
Trigger the external alarm signal in the set time section. When above
alarm is set as opening recording,
the “detection recording” state is on.
Event:
All record except general record
Stop:
The according channel stops recording in the set time section
【
Period
】
Set the time section of common recording, The recording will start
only in the set range. First select one of the record mode, then click the left
key or drag to select the period.
【
Copy to
】
copy the current channel settings to other channels.
7. Motion Detect
When system detects the motion signal that reaches the set sensitivity,
the motion detect alarm is on and the linkage function is turned on.
