GTI+ AGV5 Terminal Program IOM 1-15
All rights reserved © ALTRONIC, LLC 2015
4
2.2 Once the setup information is correct, select OK
Once Bi-Fuel is ON and the AGV5 is powered, communication should be
established. TD and RD on the adapter will blink frequently. If TD or RD is a
solid light, there is a communication error.
3.0 Understanding the Home Screen
3.1
Connection
— The Connection key allows the user to select a new computer
communication port and protocol. The Baud Rate should be set to 9600, Parity
set to None, and Packet Delay set to 100.
3.2
ResetComStats
— In the event of an AGV5 power off-to-on event
(commissioning and moving to a new load point), ResetComStats can be used
to reset communication with the AGV5 without closing the terminal program or
redoing the Connection protocol.
3.3
Disconnect
— The Disconnect key breaks the communication link between the
AGV5 and the computer in use.
3.4
Chart
— The Chart key allows the user to display the AGV5 functions in
graphical form.
3.5
SnapShot
— The SnapShot key allows the user to take a picture of the
home screen.
3.6
LogFile
— LogFile can be turned on or off. LogFile records all of the data the
AGV is processing into a .CSV file.
3.7
Advanced
— The Advanced key is currently for Altronic Factory Use Only. This
key allows for the change of the AGV5-xL characteristics.
3.8
Help
— The Help key displays the terminal program version and date
3.9
Exit
— The Exit key exits out of the program.
3.10
Control Loop Parameters
— The Control Loop Parameter section of the home
screen displays the current limits the AGV5 has to operate within.
3.11
Demand (D)
— The Demand (D) graph displays in percent the signal the GPN
control panel is requesting the AGV5 to achieve. This D value is the same as the
mA D value displayed on the Next screen of the GPN2020.
3.12
Sensor (S)
— The Sensor (S) graph display in percent where the AGV5 is in
reference to the D value. The S value is derived from the RGP Mixer sensor. The
S value in the terminal program is not the same as the S value displayed on the
NEXT screen of the GPN2020.
3.13
Valve Positon
— The Valve Positon graph displays in percent the position of the
AGV5 actuator.
3.14
Valve Drive
— The Valve Drive graph displays in percent the amount of energy
being sent to the voice coil to move the valve.