25
Possible faults
Before each maintenance and cleaning work
−
switch off device
−
wait for stop of chain saw
−
pull out main plug
After each fault clearance, put into operation and recheck all security installations.
Fault
Possible cause
Removal
Chain saw does not initiate
after switching on
Chain brake
no power
Extension cable damaged
Main plug, motor or switch defect
Release chain brake
Check power supply, power outlet, fuse protection
Check extension cable, exchange defect cable immedi-
ately
Have motor or switch checked by an approved electri-
cian or replaced by original spare parts.
Chain saw works with inter-
ruptions
external loose connection
internal loose connection
Circuit closer/breaker defect
Check power supply, power outlet, fuse protection
Check extension cable, exchange defect cable immedi-
ately
Please contact the after sales service
Please contact the after sales service
Chain saw picks, vibrates or
does not saw correctly
Chain edgeless
Chain worn
Chain tension
Chain not assembled correctly
(teeth face to wrong direction)
Chain must be regrinded or exchanged
Exchange chain
Check and adjust chain tension
Assemble chain again
Chain saw does not work
with full power
Extension cable too long or diame-
ter too small
Power outlet to far away from main
connection
Use extension cable with sufficient diameter
Use power outlet which is nearer within the working
area
Saw chain gets hot
no oil in the tank
oil flow canal blocked
chain tension too high
Chain edgeless
Refill oil (Section “Chain lubrication”)
Clean oil flow canal
Adjust chain tension
Chain must be regrinded or exchanged
no saw chain lubrication
no oil in the tank
oil flow canal blocked
Refill oil (Section “Chain lubrication“)
Clean oil flow canal
In case of further faults or inquiries please contact your local dealer.
Summary of Contents for Atika KS 2403/40
Page 2: ......
